医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

Asymmetric synthesis of 6-(2′,3′,4′,5′,6′-pentafluorophenyl)-δ-lactones via “allyl”boranes: application for the synthesis of fluorinated analog of key pharmacophore of statin drugs

Asymmetric “allyl”boration of pentafluorobenzaldehyde with various α-pinene based “allyl”boranes provides homoallylic alcohols in high de and ee; the alcohols have been converted into δ-lactones via acryloylation, ring-closing metathesis and hydrogenation. Pentafluorophenyl analog of key pharmacophore of statin drugs has been synthesized using diastereoselective epoxidation and regioselective reduction as key steps.     

活性污泥法处理城市污水中鼓风和纯氧两种曝气方法的比较

对活性污泥法处理城市污水中鼓风曝气和纯氧（或富氧）曝气这两种方法，从曝气设备结构、特点、工艺技术指标、运行管理及经济性等方面进行了分析和比较。     

Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates

Aromatic saturation of oil fractions is a key process in the refining industry due to increasing demand for cleanest distillates with superior performances. In this study, the behavior of different catalysts containing 1 wt.% of noble-metal inside a mesoporous MCM-41 (Si:Al=20) framework was investigated in the hydrogenation of naphthalene, as preliminary step to investigate bimetallic catalysts. While at atmospheric pressure only Rh and Pd showed a low hydrogenation activity, in the tests performed at 6.0 MPa the catalytic activity grew, exhibiting the following order: Pt>RhPd>>>Ru≈Ir. However, all the catalysts required a large H₂ excess, to avoid a decrease in hydrogenation and ring-opening activity, and gave rise to the best performance for a contact time of 6.8 s, favouring at lower values the partial hydrogenation to tetralin and at higher values cracking reactions. Finally, all the catalysts showed low thio-tolerance, with significant deactivation already feeding 100 ppm wt. of dibenzothiophene (DBT), with a partial reversibility only for the Pt-containing catalyst (CAT 3).     

Diffusion study of multi-organic layers in OLEDs by ToF-SIMS

A model organic light-emitting diodes (OLEDs) with structure of tris(8-hydroxyquinoline) aluminum (Alq₃)/N,N′-diphenyl-N,N′-bis[1-naphthy-(1,1′-diphenyl)]-4,4′-diamine (NPB)/indium tin oxide (ITO)-coated glass was fabricated for diffusion study by ToF-SIMS. The results demonstrate that ToF-SIMS is capable of delineating the structure of multi-organic layers in OLEDs and providing specific molecular information to aid deciphering the diffusion phenomena. Upon heat treatment, the solidity or hardness of the device was reduced. Complicated chemical reaction might occur at the NPB/ITO interface and results in the formation of a buffer layer, which terminates the upper diffusion of ions from underlying ITO.     

Mesoporous nanotube aggregates obtained from hydrothermally treating TiO2 with NaOH

Nanotube aggregates with high porosity were prepared from hydrothermal treatment of TiO₂ particles in NaOH at 130 °C, followed by HCl rinsing to different pH values. Pore structure of the aggregates, which were mainly mesoporous, was characterized by analyzing the N₂ sorption isotherm with different methods including the t-plot and density function theory. The surface area, pore volume and mean pore size of the aggregates increased with the rinsing acidity to reach a maximum (e.g. 400 m²/g in surface area) at pH 1.6 and then decreased with further increase of the acidity. The crystalline phase and composition of the aggregates were, as well, significantly affected by the acidity of the post-treatment rinsing. Large-surface area aggregates were of loosely-attached nanotubes, composed of both anatase TiO₂ and H₂Ti₂O₅·H₂O, obtained under a mildly acidic rinsing condition, while basic or highly acidic conditions resulted in the formation of closely coagulated dense structures consisting of different crystalline phases.     

钌催化二氧化碳加氢合成甲酸的研究

钌催化二氧化碳加氢合成甲酸的研究张俊忠，李忠，王辉，王常有（太原工业大学煤化所Ｃ１室，太原０３００２４）关键词ＣＯ_２催化加氢，甲酸合成，钌络合催化剂１．前言由于ＣＯ２对环境、气候和生态等方面带来愈加恶劣的影响以及碳资源的日益短缺，近年来对ＣＯ２开发?..     

AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

后处理对TiO_2纳米薄膜的表面结构和光催化活性的影响

半导体TiO2光催化材料对环境中各种污染物的明显去除效果已引起人们的广泛关注犤1～6犦。在普通钠钙玻璃表面涂制高光催化活性的TiO2纳米薄膜,制成环保建筑材料,不仅可以自洁玻璃表面,而且可以用于净化空气、处理废水等。但由于在热处理过程中玻璃基体内的Na+离子扩散到薄膜表面,形成光生电子和空穴的复合中心,使TiO2纳米薄膜的光催化活性大大降低犤7～10犦。为了减少玻璃中Na+离子对TiO2薄膜光催化活性的有害影响,Paz等犤8犦研究了将钠钙玻璃浸入酸溶液中,使玻璃表面的钠离子被酸中的氢离子置换出来;在玻璃表面形成SiO2凝胶层,以便阻…